Burglar Alarm basic operation

If your property is fitted with a burglar alarm. It is important to remember the number and do not leave a copy of the number anywhere near the alarm

If you have an alarm, you will receive a secure email to your personal account confirming the alarm number that is generated when you collect your keys.

Do not change the code on the alarm or tell it to anyone. If there is a fault on the alarm or you are unsure how to use it, call Unipol 

Basic Operation

Enter your code to switch the alarm on.

Enter the code to switch the alarm off.

To set the alarm (turn it on):

Enter your code number. Check that the system is clear (none of the zone indicators are showing). If clear, the sounder will produce a bleep tone. Leave the property. The system will set at the end of the exit time and the bleep tone will stop.

 To unset the system (turn it off):

Enter your code, if the system is clear (no alarm has been activated) the system will return to day mode. If the system has been activated, entering the code will turn off the alarm. Press RESET to clear the display and return to day mode. 

To omit a zone:

Starting from the day mode, enter your code and the exit tone will start. Press the OMIT button and the exit tone changes to an omit tone. Now

enter the zones you wish to omit. Omitted zones will now light up. If you make a mistake, press 0 to cancel and then enter the zones required to be omitted. When the selection is correct, press SET. The system will now return to exit mode and the exit tone will continue.